Skip to main content
How to make a Mayday call on VHF and DSC — plus Pan-Pan and Sécurité

How to make a Mayday call on VHF and DSC — plus Pan-Pan and Sécurité

When something goes badly wrong at sea, a clear Mayday call is the fastest way to get help. Every crew member on a delivery should be able to make one — not just the skipper. Here is the procedure coastguards teach, word for word.

Updated 17 November 2026 · 6 min read

Key takeaways

  • ✓Mayday is for grave and imminent danger to a vessel or a person, when immediate help is needed. It has priority over all other radio traffic.
  • ✓Use VHF channel 16 on high power. A DSC radio can send a distress alert with your position at the press of the red button.
  • ✓After a DSC alert, send the voice Mayday on channel 16 once the coastguard acknowledges — or after about 15 seconds.
  • ✓Pan-Pan is for urgency without immediate danger (for example engine failure near rocks); Sécurité is for safety messages such as a navigation hazard.
  • ✓A mobile phone call from sea does not give the coastguard your position — use VHF or DSC.

Mayday by voice on VHF channel 16

  • •Check the main battery switch is on so the radio has power
  • •Switch the VHF on, select high power and channel 16
  • •Press and hold the transmit button and speak slowly and clearly
  • •“Mayday, Mayday, Mayday”
  • •“This is [boat name ×3], [call sign and MMSI if you know it]”
  • •“Mayday [boat name]”
  • •“My position is [latitude and longitude, or bearing and distance from a known point]”
  • •“[Nature of distress — sinking, on fire, man overboard…]”
  • •“[Help required — immediate assistance]”
  • •“[Number of people on board]”
  • •“[Other important information — drifting, flares, liferaft]”
  • •“Over” — then release the button and listen

No answer after about a minute? Check the radio and repeat the call. Keep a printed card with this layout next to the radio.

Sending a DSC distress alert

Most modern VHF radios have Digital Selective Calling (DSC). With a registered MMSI and a GPS connected, lifting the cover and pressing the red distress button sends an alert with your identity, position and time on channel 70. If there is time, choose the nature of distress from the menu first and hold the button for about five seconds.

The radio then switches to channel 16. When the coastguard acknowledges — or after about 15 seconds — make the voice Mayday on channel 16 and include your MMSI. Without an acknowledgement the alert repeats automatically every few minutes.

Sent an alert by mistake?

Cancel it at once with a voice message on channel 16: “All stations, all stations, all stations, this is [boat name ×3], [MMSI]. Cancel my DSC alert sent in error. This is [boat name], [MMSI]. Over.” A false alert that is cancelled straight away is not a problem; one that is not cancelled can start a search.

Mayday, Pan-Pan or Sécurité?

Pan-Pan and Sécurité use the same structure: the signal word three times, “all stations”, who you are, where you are and the message.
CallWhenExample
MaydayGrave and imminent danger to a vessel or person; immediate help neededSinking, fire out of control, person overboard
Pan-PanUrgent situation, but no immediate danger to lifeEngine failure drifting towards a lee shore, injured crew who needs medical advice
SécuritéSafety information for other vesselsFloating container, navigation light out, dangerous weather

Practise before you need it

  • •On joining a delivery, find the radio, the distress button and the MMSI and check the GPS is connected
  • •Read the boat’s position aloud from the plotter once each watch so it becomes a habit
  • •Know how to switch on the handheld VHF and the EPIRB as back-ups
  • •Hold a marine radio licence (for example the SRC) — it is required to operate a ship’s radio in most countries
Rules change and differ between flag states. Use this guide as a starting point and always confirm current requirements with the issuing body or flag administration before you book a course or accept a job.

Frequently asked questions

What channel is used for a Mayday call?+

VHF channel 16, on high power. A DSC distress alert is sent automatically on channel 70 and is followed by a voice Mayday on channel 16.

What do you say in a Mayday call?+

Mayday three times, “this is” and the boat name three times with call sign and MMSI, Mayday and the boat name, your position, the nature of distress, the help you need, the number of people on board, other useful information and “over”.

What is the difference between Mayday and Pan-Pan?+

Mayday is for grave and imminent danger needing immediate help. Pan-Pan is for an urgent situation where there is no immediate danger to life.

Can I call the coastguard on my mobile phone at sea?+

You can, but the coastguard cannot fix your position from a mobile call at sea. VHF or DSC is the right way to raise the alarm.

Sources

Topics in this guide: mayday call · how to make a mayday call · dsc distress alert · pan pan call · securite call · vhf channel 16

Put it to work

More guides