Key takeaways
- ✓Plan from measured fuel burn at the speed you will actually run — not the brochure figure.
- ✓Consumption rises sharply with speed, load, weather and a dirty hull; slowing down is the biggest range extender.
- ✓A common rule is thirds: one third to get there, one third for the unexpected, one third in reserve. Many professionals plan with at least a 10–20% reserve on top of the leg.
- ✓Base range on usable fuel — around 90% of tank capacity — because not all fuel can be picked up by the pickups.
- ✓Carry spare fuel filters, check fuel quality at every stop and agree in the contract who pays for fuel.
Working out real consumption and range
The simplest method: note the engine hours and the fuel taken on at a known fill-up, run at your planned cruising speed, then divide the fuel used by the hours run to get litres per hour. Divide your speed in knots by litres per hour to get nautical miles per litre. Range is then usable fuel × miles per litre.
Fuel gauges on many boats are unreliable. Where possible, check by sounding the tank or by the fill-up figures, and confirm with the engine’s fuel-flow data if the boat has it.
Example calculation
| Step | Figure |
|---|---|
| Tank capacity | 2,000 litres |
| Usable fuel (≈ 90%) | 1,800 litres |
| Measured burn at 9 knots | 60 litres per hour |
| Miles per litre | 9 ÷ 60 = 0.15 nm per litre |
| Theoretical range | 1,800 × 0.15 = 270 nm |
| Planned leg with one-third reserve | about 180 nm |
What reduces range on a delivery
- •Speed: on most planing and semi-displacement boats, consumption per mile rises steeply above displacement speed
- •Head seas and wind against you
- •A fouled bottom or propellers — check when the boat was last antifouled
- •Heavy loads: full water tanks, tender, spares and owner’s gear
- •Generator use for air conditioning and hot water
- •Detours for weather or ports that turn out to have no fuel
Refuelling stops and fuel quality
- •Call ahead: confirm the fuel dock has diesel, its opening hours and whether it takes your boat’s size and draft
- •Plan an alternative port for every stop in case the first one is closed or out of fuel
- •Carry spare primary and secondary fuel filters and know how to change them and bleed the system at sea
- •Check the water separator / filter bowls after refuelling and in rough weather, when sediment is stirred up
- •Keep fuel receipts — they are usually reimbursed by the owner (see the delivery contract)
Contaminated fuel is one of the most common causes of engine stops on deliveries. Clean filters and a spare set aboard solve most of these problems at sea.
Who pays for fuel?
On most deliveries the owner pays for fuel, oil and harbour dues, either through a float given to the skipper or by reimbursing receipts. Agree this in writing before departure, together with how a fuel shortfall caused by weather or a needed detour will be handled.
Frequently asked questions
What is the rule of thirds for boat fuel?+
Use one third of your fuel to get to your destination, keep one third for the unexpected (weather, detours) and one third in reserve. It is a conservative planning rule widely used by boaters.
How do you calculate a boat’s fuel range?+
Measure fuel burn in litres per hour at your cruising speed, divide speed by burn to get miles per litre, and multiply by usable fuel (about 90% of tank capacity). Then subtract your reserve.
How much fuel reserve should a motor yacht carry?+
Many skippers plan with the rule of thirds; at minimum, keep a reserve of 10–20% on top of the leg, and more when weather or fuel availability is uncertain.
Who pays for fuel on a yacht delivery?+
Usually the owner — via a float or by reimbursing receipts. Put it in the delivery contract.
Sources
Topics in this guide: boat fuel range calculation · rule of thirds boating · motor yacht fuel consumption · fuel reserve boat · refuelling stops yacht · diesel fuel filters boat
Put it to work
